| Room | Kitchen |
|---|---|
| Tile | Mixed gray rectangular tile backsplash |
| Pattern | Visible in the project photographs |
| Size | Not confirmed from the supplied photographs |
| Town | Chicago area |

About this job
A kitchen with white cabinets and a backsplash of mixed gray rectangular tile, shown in two photos. The gray shifts from tile to tile, which reads clearly against the plain white cabinet fronts.
The tile size and the address weren’t kept with these photos; the town is listed as Chicago area. On a backsplash, the layout usually starts at the countertop so any cut row lands under the upper cabinets.
- 01
Measured and planned
We check the room’s dimensions and mark layout lines before any tile is set.
- 02
Prepared and waterproofed
Prep depends on the substrate, with waterproofing where the area gets wet.
- 03
Set
Tile goes down to the layout lines, with joints and cuts kept even.
- 04
Grouted and sealed
Grout and any sealer are chosen to suit the tile and how it will be cleaned.
- 05
Walked through with the owner
We go over the finished surface with the owner.
Tell us about the room
Share the surface, the room and what you are considering.
(872) 217-9211[email protected]