| Room | Interior rooms |
|---|---|
| Tile | Large white tiles with gray marble-look veining and dark perimeter baseboard |
| Pattern | Visible in the project photographs |
| Size | Not confirmed from the supplied photographs |
| Town | Chicago area |
About this job
Two photos taken while the work was still in progress. The interior rooms are being floored in large white tiles with gray marble-look veining, with a dark baseboard around the perimeter.
Because these shots were taken mid-construction, they show the tile before the rooms were finished, and trim or grout may not be in its final state. Sizes and the town weren’t recorded; the location is given as Chicago area.
- 01
Measured and planned
We check the room’s dimensions and mark layout lines before any tile is set.
- 02
Prepared and waterproofed
Prep depends on the substrate, with waterproofing where the area gets wet.
- 03
Set
Tile goes down to the layout lines, with joints and cuts kept even.
- 04
Grouted and sealed
Grout and any sealer are chosen to suit the tile and how it will be cleaned.
- 05
Walked through with the owner
We go over the finished surface with the owner.
Tell us about the room
Share the surface, the room and what you are considering.
(872) 217-9211[email protected]